基于Remoting的设备能力导航的工艺规划调度系统设计与实现

为克服传统工艺规划系统与生产调度系统分开单独设计的缺点，用Remoting技术及“面向接口编程”的思想，设计了多层分布式的基于设备能力导航的工艺规划与调度系统。系统在进行工艺规划与生产调度时，均实时采集设备的当前负荷状况，在保证交货期的前提下，确定出零件工艺与机床设备的匹配方案。将该方案用于设计能保证各机床设备之间的能力基本平衡。     

制药工程专业培养计划中应渗透清洁生产理念与技术

本文论述了制药工程专业培养计划中渗透清洁生产理念与技术的必要性,探讨了将清洁生产理念与技术渗透到制药工程专业培养计划中的思路与具体方法,以促进我国制药工程专业建设和制药行业的可持续发展.     

多变量解耦极点配置组合自校正前馈控制器

本文提出了一种新的多变量解耦极点配置自校正前馈控制器,它具有使伺服跟踪性能和 随机调节性能两者均优的组合自校正特性.仿真例子说明了其有效性.     

富氧燃烧技术在梭式窑中的应用

研究了富氧燃烧技术对梭式窑烧成的影响.研究结果表明,随着氧浓度从21%-30%的逐渐增加,CO总浓度和NO总浓度都先明显下降,后缓慢上升;节能效果在初始段较为明显,而后效果不明显;而实际烟气量与氧浓度成反比,与过剩空气系数成正比.     

主跨348m+348m三塔单索面PC梁斜拉桥

宜昌市夷陵长江大桥采用三塔斜拉桥，总体布置为(128．08 348 348 120．35)m。介绍了该桥的合理性及结构特点。     

介孔氧化铁对正辛醇乙氧基化反应的催化性能

以十二烷基磺酸钠为模板剂、乙二胺为碱性介质,将水热法合成的氧化铁/十二烷基磺酸钠复合中孔材料在550℃、空气气氛中煅烧10h,除去模板剂,得到介孔氧化铁。通过X射线衍射、氮气吸附-脱附方法对介孔氧化铁的晶体结构和表面物性进行表征。表征结果显示,煅烧后的介孔氧化铁具有典型的六方介孔的结构特征,平均孔径为5.4nm。将介孔氧化铁用于催化正辛醇乙氧基化反应,研究结果表明,升高反应温度和初始压力、增加催化剂用量,可加快环氧乙烷的反应速率,同时产物的相对分子质量分布较窄。当平均聚合度为6.5时,正辛醇聚氧乙烯醚相对分子质量分布的选择性系数达到21.1。     

裂齿矩形翅片板翅式换热器优化设计的分析

对裂齿矩形翅片板翅式换热器中的裂齿矩形翅片的传热效率作了分析,并以单位质量材耗的换热能力最大为目标函数,分析研究了在不同雷诺数(Re)的操作条件下裂齿矩形翅片间角度、翅片厚、长度、宽度及极厚之间的关系。结果表明:在气体换热的场合下,当Re在某一范围时翅片可有效地起到强化传热的作用。当板厚为5mm,翅片厚为3mm,翅片间夹角为45°～70°,Re为2×10~3～8×10~3,最佳翅片纵向间距与翅片长度和翅片厚度乘积的平方根的比为1.5～2.5,最佳翅片尺寸系数为3～5时,传热强化效果较好。     

Comparison of different methods to prepare MgO whiskers

Magnesia whiskers have been made by hydrolysis of MgCl₂–KCl melt and conversion of magnesium hydroxide whiskers. The morphology of MgO whiskers was examined by SEM and TEM. Composition of products was identified by XRD. Comparisons have been made on the morphology and quality of the products by different methods. Discussions have been made on the efficiency, product quality control and scale-up feasibility of these methods. Whiskers prepared by hydrolysis have uniform diameter but other shapes of magnesia are often found. Conversion of Mg(OH)₂ whiskers to MgO whiskers is simple and easy to scale-up, but the product often has many defects caused by decomposition. Nevertheless, the single crystal structure can be reserved as revealed by electron diffraction. XRD results show that the purity of products by hydrolysis is better than that by conversion. The conversion method is more hopeful for industrial production.     

Stochastic nonlinear stabilization — II: Inverse optimality

After considering the stabilization of a specific class of stochastic nonlinear systems in a companion paper, in this second part, we address the classical question of when is a stabilizing (in probability) controller optimal and show that for every system with a stochastic control Lyapunov function it is possible to construct a controller which is optimal with respect to a meaningful cost functional. Then we return to the problem from Part I and design an optimal backstepping controller whose cost functional includes penalty on control effort and which has an infinite gain margin.